VentSaver.com Logo

 

VentSaver Vent Guards: Prevent Crushed Vent Pipes.

VentSaver products will help prevent crushed vent pipes by splitting and diverting the snow. This ingenious vent guard product also adds support and strength to your vent pipes, chimneys or masts . The innovative fin design cuts through packed ice and snow, causing the snow slide to divert around the pipe, and to assist in shedding the snow and ice from your roof. Installation is quick and easy. VentSaver is made from quality non-corrosive, powder-coated aluminum, stainless steel and aircraft cable.

VentSaver vent pipe guards prevent crushed vent pipes by splitting ice and snow around vent pipes.

Use with Snow Guards
If damaging snow slides are a problem we recommend installing snow guards as well as VentSavers. Snow guards help prevent snow slides by allowing snow and ice to melt completely or drop off in small amounts. We also recommend installing snow guards on upper roof areas to prevent the impact of snow and ice dropping from unprotected upper roof areas onto roof areas with VentSaver installed. Review the full product line for vent savers, snow guards, roof clamps and gutter leaf guards.

Download the VentSaver Spec Sheet

The Cricket Eliminator Vent Protection That Works!

VentSaver P383

VentSaver P383

The VentSaver P383 Series is made from non-corrosive, powder-coated aluminum and stainless steel aircraft cable. Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. The 383 Series will fit any roof pitch and an infinite array of pipe sizes from 1" to 14" around. It's 9" standing profile is designed to protect taller stacks such as chimneys, gas vents and masts. The beauty of the 383 Series is the variety of applications it will fit as well as the ease of installation.

VentSaver FB151

VentSaver FB151

The VentSaver FB151 Series is made from non-corrosive, powder-coated aluminum with a pre-punched stainless steel strap to fit smaller sizes of pipe from 1.5" - 4". Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. It protects a standing profile of 6". Installation is quick and easy.

VentSavers are also called Stacksaver vent protectors.


You Can Stop

Vent Pipe Damage

Stop Roof Pipe Damage with VentSavers.

Protect all vent pipes before this happens.

Broken Gas Pipe.

Your roof is heavy with snow on a thick layer of ice. Rain speeds the natural glacial action as the large sheets slide from the roof taking your chimney or vent pipe with it. Before you know it, gallons of water have run into the attic. The house is filled with gas fumes or wood smoke. The insulation becomes saturated with water and the damage is done. You wake up one cold winter morning with your ceiling collapsed into the middle of your living room or worse.....your house is filled with fumes or on fire!

 

VentSaver FB151

VentSaver HD

The largest of the three models, recommend for extreme snow conditions. The VentSaver HD Series is made from non-corrosive, powder-coated aluminum and stainless steel aircraft cable. Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. The HD Series will fit any roof pitch and an infinite array of sizes from 1" to 14" around. The fin has a 14" standing profile that is designed to protect taller roof stacks, chimneys, gas vents and masts. The beauty of the HD Series is the variety of applications it will fit as well as the ease of installation.

Newsletter Signup!