The SnoCleat RCT and RC Snow Guards can be fitted at any time of year to standing seam metal roofing. This product has a broad face that measures 4 inches wide and is made to accommodate a color strip that is 2 inches wide to match your roof. The RCT version fits most standing seams up to 1" wide including bulb seams and t-seams. Interior Clamp Dimensions are 1” Wide X 1.375” High.
The 3" swivel bracket that is unique to this seam mounted snow guard provides for a 31 degree angle change in hips and converging valleys. In the event of a significant snow and ice collision, the torque on the mounting bracket can be changed to help protect the seams. An established testing facility has shear and tensile tested the RoofClamp RC and RCT mounting clamps. Before making a purchase, always check the panel compatibility and spacing requirements.
Special Note: In the case of a sudden snow slide, panel damage may occur since individual standing seam mounted snow guards lack a release component. With other types of seam mounted snow guards, "Caveat Emptor"—this is a frequent issue and a significant worry. Using our unique swivel bracket's torque setting at its lowest setting may help to alleviate this typical issue. Never use snow guards on a roof's isolated regions, such as the area directly above vents, chimneys, or doorways. Depending on the roof slope and length of the run, multiple rows of snow guards may be necessary. The best way to retain snow and ice on a metal roof is to install this snow guard system according to the manufacturer's recommended spacing guidelines.
Optional Color Matching: As seen in the above image, the face of this guard can be fitted with a user-supplied piece of 2" wide metal roofing. Additionally, powder coating is available for an extra cost. Call us at 1-800-766-5291 for information on pricing and availability.
Spec Sheet Cut Sheet Panel Compatibility Installation Instructions
